4 * 10 / 100M BASE - T RJ45 ports PoE PSE ONU EPON ONU 30W POE
standards
Product Overview
NTW-E17400P series is POE product, with four fixed 10/100Mbps auto-adapted POE ports. It
supports IEEE802.3af 15.4W and IEEE802.3at 30W POE standards. It
can auto discovery the power receiving devices which support
IEEE802.3af/at standard and supply power to it.
To the connected devices which not support PoE, it will auto stop
supplying power. NTW-E17400P supports to work with IP camera, IP
phone, wireless AP and other network devices, and supply power to
these devices. It works with central device OLT to implement integrated management,
long-distance fault location and decrease maintenance workload. It
is metal casing design and suitable for FTTB/FTTH.
Product Feature
1. Meet IEEE802.3/802.3ah standard.
2. Automatic discovery and registration.
3. Support DBA and all kinds of SLA .
4. Support IEEE802.1DRSTP.
5. Support IGMPSnoopingV2 multicast.
6. EMI and ESD protection certification.
7. Support VLAN.
8. SNTP client side automatic time synchronization.
9. Rich and powerful OAM with remote management capabilities.
10. Support port speed limit, loop detection and port isolation.
11. Support state detection and automatic fault location.
12. Support power-off alarm.
13. Each PoE power supply port can automatically identify whether
or not a power supply is connected to a standard receiving device
to power or power it off.
14. Support IEEE802.3af15.4W and IEEE802.3at30W standard.
Technical Parameter
| Model | NTW-E17400P |
| Electrical port | 4*10/100M BASE-T RJ45ports (self adaptation). |
PON port
| Uplink and downlink symmetric, 1Gbps transmission rate. |
| Optical interface:SC/PC. |
| Network coverage radius: 30km. |
| High sensitivity optical receiver: no less than -26dBm. |
| Optical power:2-7dBm. |
| Security: ONU authentication mechanism. |
| Standard | IEEE 802.3ah. |
| (YD/T 1475-2006) |
| IEEE 802.1D, Spanning Tree |
| IEEE 802.1Q, VLAN |
| IEEE 802.1w, RSTP |
| Ethernet – II, Ethernet-SNAP |
| Service quality | Back pressure flow control (half duplex) |
| IEEE 802.3x flow control (full duplex) |
| Prevent Head Of Line |
| IEEE p802.1p, CoS |
| 4 dispatch queues per port map the 8 priority levels of the 802.1p |
| WR,SP and FIFO queue scheduling algorithm |
| Port speed limit |
| VLAN | Port VLAN |
| IEEE802.1Q VLAN relay |
| POE | Power standard:IEEE802.3af15.4W IEEE802.3at30W |
| Working mode:Automatic identification of point equipment, automatic
power supply, power interruption |
| Network security | IEEE 802.1x, Port access control, support local and remote
authentication,EAP finality or pass through. |
| CHAP,EAP authentication |
| Limit the maximum number of users per port |
| Port protection |
| Message storm control |
| Configuration management | CLI, Web, SNMP, TELNET management etc. |
| Software upgrades can be done by TFTP and FTP |
| Local or server logs syslog . |
| ping, tracerouten etc |
| Size | 170 mm(W) x 98 mm(D) x 28 mm(H) |
| Install :plug and play |
| Heat dissipation | Long time to use(24hours),equipment heating does not cause
performance degradation and device deformation damage. |
| Environment | Working environment:-40℃～65℃；10%～85% non-condensing |
| Storage environment:-40℃～80℃；5%～95% non-condensing |
| Power supply | Power adapter type: switching power adapter |
| Input rated voltage:110V～240V,50/60Hz |
| Input voltage fluctuation range: ±20％/ ±10％ |
| Safety wire:Install non renewable temperature protection at the
input port.(or temperature resistance) |
| power: maximun10W |
| Certification requirements: CCC , CE certification or customer
designated certification. |
Order Information
| Model | Description |
NTW-E17400P |
Industrial 4 ports POE ONU EPON
|
